Description
Luminescent Hybrid Spinning Mouthpiece for Dynavap Stems
This spinning mouthpiece is made from solid resin and elm burl. These act as a replacement or upgrade to your current stem setup. It operates in the same way as the factory wooden mouthpieces you get from Dynavap. This piece has luminescent purple coloring along with precision drilled holes added to fit the condensers/o-rings perfectly. It glows a bright blue in the dark.
Spinning Mouthpiece Exact Specs Overall length: Appx. 18mm Closed off end: 11.5mm Open end: 10.5mm
Installation Instructions
- Remove o-rings from condenser
- Slide new mouthpiece towards the center of condenser
- Install smaller o-ring to the far end of the condenser aligning with the grooves for the o-ring.
- Slide mouthpiece all the way to the smaller o-ring
- Then slide larger o-ring up to meet the large end of the mouthpiece, making sure to align o-ring with grooves on the condenser
- Then install condenser with mouthpiece installed into the open end of your stem
- Note: Adding a very small amount of our stem wax(or wax of your choosing) to the o-rings is recommended for ease of installation and removal. This is purely preference from person to person, but it can help with longevity of the o-rings.
* This order will Only contain the spinning mouthpiece. Condensers, o-rings, tip and stem sold separately from the Dynavap website and other outlets.
