Description
Canary Wood Spinning Mouthpiece for Dynavap Stems
This spinning mouthpiece is made from a solid piece of canary wood. As part of our new line of mouthpieces this acts as a replacement or upgrade to your current stem setup. It operates in the same way as the factory wooden mouthpieces you get from Dynavap. It has been stabilized along with precision drilled holes added to fit the condensers perfectly.
Spinning Mouthpiece Specs Overall length: Appx. 18mm Closed off end: 11.25mm Open end: 9.9mm
Installation Instructions
- Remove o-rings from condenser
- Slide new mouthpiece towards the center of condenser
- Install smaller o-ring to the far end of the condenser aligning with the grooves for the o-ring.
- Slide mouthpiece all the way to the smaller o-ring
- Then slide larger o-ring up to meet the large end of the mouthpiece, making sure to align o-ring with grooves on the condenser
- Then install condenser with mouthpiece installed into the open end of your stem
- Note: Adding a very small amount of our stem wax(or wax of your choosing) to the o-rings is recommended for ease of installation and removal. This is purely preference from person to person, but it can help with longevity of the o-rings.
* This order will Only contain the wooden mouthpiece. Condensers, o-rings and tips sold separately from the Dynavap website and other outlets.