Description
Diamond Wing XL Dynavap Stem + Matched Ebony M.P.
Series: High Class Design: Diamond Wing/Black Limba Burl Wood(Cross Grain Cut) Air-port: 2 Hole/3mm Hole/Widened Style
Comes with Matched Ebony Mouthpiece
NOTE: With this order you will get the STEM and MOUTHPIECE from the photos. All you’ll need is a Dynavap tip, xl condenser and vapcap. Air-port is already pre-installed. Comes with spinning mouthpiece to work with Dynavap condensers/o-rings.
Specs: Appx. 79mm total length(without m.p.)-98mm(with m.p.) 14mm taper for glass device compatibility. Outer Diameter: Appx. 14.2mm
Works with Dynavap parts, mouthpieces etc. Air-port is pre-installed.
High quality black limba burl wood XL length stem for Dynavap components. Cross cut black limba allows for the grain patterns to shimmer in the light due to the wood being cut and turned against the grain. Along with a matched ebony mouthpiece with a matching diamond wing design. This stem has been created using a similar base design style to that of the Dynavap HyperDyn midsection with side wings that are finned out and give maximum tactile locating of the air-port. Diamond flute line accents are added to each side wing. Air-port pocket is a large rectangular design and very easy to keep your finger over while rolling stem during use. This design is easily our best effort for making an air-port that is easy to blindly locate with maximum airflow. Air-port has two separate holes aligned inside the air-port cutout to produce max airflow. All mouthpiece/condenser setups will work with this stem including the HyperDyn, M7 and standard/xl condensers. All of our stems function with or without mouthpiece attached as they are lined with med grade stainless steel liners. Stem has been finished with a satin finish polishing which is all natural.
These are part of our new class of Dynavap stem upgrades that all have a slight chamfer or bevel at the ends of each side of the medical grade stainless steel linings. This allows for easy installation and removal of your dynavap condensers, tips and o-rings.
These are dynavap midsections (stems) that can be quickly swapped out from the standard Dynavap metal midsections. This stem is compatible with the XL condensers and o-rings when using the mouthpiece and standard condenser without m.p. It has a 14mm taper making it compatible with any glass pieces that have a 14mm hole for it to adapt to.
Stem has a precision drilled hole that gets fitted with a thin wall, medical grade stainless steel tube/liner. This makes the stem perfectly compatible with the Dynavap parts as well as adding rigidity and weight making it feel nice when held. The weight also gives it the same feel when in use as your used to with the metal Dynavap midsections. Once the stem is created it then gets sanded and polished using our nature based polish/waxes. Everything made in our shop is hand crafted.
Note: Your order will only contain the stem and mouthpiece in the photos. Comes with matching mouthpiece. Dynavap XL condenser can be easily added to your order. Any mouthpieces both from us and Dynavap will work with all of our stems.
Compatible with the Dynavap XL condensers, o-rings and mouthpieces.
