Attenuated Dynavap XL Burl Twisted Stem Design + Matching M.P.-NEW!

$65.00

1 in stock

Wood Wax

  • Add Some Wood Wax *

Dynavap Parts

  • Complete your stem with genuine Dynavap parts! *

File and comments upload

  • File upload *

    Anything you need to add or want us to know? Comments box is here for you.Max file size: 1 MBPermitted file types: jpg jpeg jpe png gif

  • Order Comments *

Product total

Options total

Grand total

Description

Attenuated Dynavap XL Burl Twisted Stem Design + (Optional Use) Matching Mouthpiece

Series: Twisted Stems     Design: Attenuated Spiral/Buckeye Burl Wood  Air-port: Circular Design/3mm Hole      

Comes with matching mouthpiece & Device Connecting O-Rings                                                   

NOTE: With this order you will get the STEM and MOUTHPIECE from the photos. All you’ll need is a Dynavap tip, xl condenser and vapcap. Air-port is already pre-installed.

Specs: Appx. 79mm total length(without m.p.)-93mm(with m.p.) 13-15mm o-rings included for glass device compatibility.            Outer Diameter 12.5mm

Works with Dynavap parts, mouthpieces etc. Air-port is pre-installed.

Quality, dyed burl wood, XL length stem for Dynavap components. Colors of golden/green/aqua blue. These attenuated stems are as close in size to the factory Dynavap stems as we can get. More case storage options due to smaller diameter, but still having glass device compatibility via included o-rings. This new design gives a smaller diameter stem with the same 14mm device compatibility as our tapered stems by sliding on the included o-ring when desired. It is more similar to the Dynavap Omni in size, with just a slightly larger diameter. With two layers from the medical grade stainless steel liner to the layer of wood, it still offers very low heat transfer from the tip to hands during use. Center groove around air-port helps with no-look locating of the air-port. Mouthpiece can be connected via condenser, but comes with a groove on the mouthpiece end to easily use without the m.p. This stem has a straight cut all the way through at a little over 12mm in diameter. Stem has a 3D spiral twist pattern carved throughout. This smaller size also gives more options for case storage. Stem has been finished with a satin finish polishing which is all natural.

These are part of our new class of Dynavap stem upgrades that all have a slight chamfer or bevel at the ends of each side of the medical grade stainless steel linings. This allows for easy installation and removal of your dynavap condensers, tips and o-rings.

These are dynavap midsections (stems) that can be quickly swapped out from the standard Dynavap metal midsections. This stem is compatible with the XL condensers and o-rings.

Stem has a precision drilled hole that gets fitted with a thin wall, medical grade stainless steel tube/liner. This makes the stem perfectly compatible with the Dynavap parts as well as adding rigidity and weight making it feel nice when held. The weight also gives it the same feel when in use as your used to with the metal Dynavap midsections. Once the stem is created it then gets sanded and polished using our nature based polish/waxes. Everything made in our shop is hand crafted.

Note: Your order will only contain the stem and mouthpiece in the photos. Comes with matching mouthpiece. Dynavap XL condenser can be easily added to your order. Any mouthpieces both from us and Dynavap will work with all of our stems.

Compatible with the Dynavap XL condensers, o-rings and mouthpieces.

Additional information

Weight4 oz
Dimensions6 × 4 × 1 in

You may also like…