Dynavap 3XL Boro-Glass/Olivewood Burl Specialty Stem Setup-NEW!

Description

Dynavap 3XL Boro-Glass/Burl Wood Specialty Stem Setup

Series: High Class Stems     Design: Olivewood Burl  Air-port: No Air-port    

Specialty Glass/Burl Wood Dynavap Stem Setup                                                 

What’s Included:

• 4 and 1/2″ Boro-glass/16mm diameter x 2.6mm thickness
• Olivewood burl wood tip adapter/lined with med-grade stainless steel liner
• Olivewood burl wood mouthpiece end/adapter lined with med-grade stainless steel liner
• Extra set of 4 (brown) high-temp o-rings
• (1) can of our D.W. wood wax
• Instruction sheet for how to connect/remove parts and setup options.

Specs: Appx. 6 and 1/2″ total length            Outer Diameter 16mm

High quality olivewood burl 3XL glass/wood stem for Dynavap. This is our 2025 stem setup using both glass and wood with our metal liners for perfect fitment of Dynavap parts. It has a new 7/3 fin design, with 7 3D fins cut in the tip and 3 on the mouthpiece side. As well as a concave version of our king’s mouthpiece design cut to create perfect grooves. This setup has 3 total pieces or sections. The tip end and mouthpiece end use two o-rings to connect inside the glass stem. This second version of our boro-glass stems does not have a separate smaller mouthpiece, but any of the Dynavap parts will fit within the metal liners as well as our hyperdyn mouthpieces if you desire to use one. So there are many options to Frankenstein this stem setup to your liking. Glass tube is high quality borosilicate glass that is rigid yet light weight. Stem pieces have been finished with a satin finish polishing which is all natural. Stem pieces will come with (4) black or brown high-temp o-rings pre-installed and extra set of high-temp o-rings.

These are limited run setups, but we may add more periodically. They combine aspects of our wood stems that all have medical grade stainless steel liners to fit all Dynavap parts while removing the need for a condenser. Instead the glass tube acts as the main stem portion, giving you the ability to see how much vapor you’re pulling from each hit. These stem setups are able to pull monster hits and are perfectly paired with the HyperDyn tip/caps to accomplish this, though any Dynavap tip will work and produce different experiences with other tip/cap setups.

Stem tip/mouthpiece ends have precision drilled holes that get fitted with a thin wall, medical grade stainless steel tube/liner. This makes the stem perfectly compatible with the Dynavap parts. Once the stem is created it then gets sanded and polished using our nature based polish/waxes. Everything made in our shop is hand crafted.

Note: Your order will only contain all of the exact pieces shown in the photos, Except for the tip and cap. But they are available here for purchase to complete your stem setup. Out of stock Dynavap parts can be easily purchased from Dynavap.com and other online Dynavap makers.